Weather (Other) · NTSB CEN12FA161

CESSNA 414A — Hayden, CO

2 fatal IMC
DateFebruary 19, 2012
LocationHayden, CO
AircraftCESSNA 414A
Purpose of flightPersonal
ConditionsDay · Instrument Meteorological Cond
Phase / occurrenceApproach-IFR initial approach Structural icing
Pilot age75
Pilot total timeUnknown
Time in typeUnknown
Fatalities2, 4 serious

Probable cause

The pilot’s inadvertent stall during a missed approach. Contributing to the accident was the pilot’s operation of the airplane in forecasted icing conditions without using all of its anti-ice systems.

NTSB findings

  • Environmental issues-Conditions/weather/phenomena-Temp/humidity/pressure-Conducive to structural icing-Effect on equipment - F
  • Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained - C
  • Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot - F
  • Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained - C

What happened

The pilot performed an instrument approach to the runway with an approaching winter storm. A review of on-board global positioning system (GPS) data indicated that the airplane flew through the approach course several times during the approach and was consistently below the glideslope path. The airplane continued below the published decision height altitude and drifted to the right of the runway’s extended centerline. The GPS recorded the pilot’s attempt to perform a missed approach, a rapid decrease in ground speed, and then the airplane descend to the ground, consistent with an aerodynamic stall. Further, the airplane owner, who was also a passenger on the flight, stated that, after the pilot made the two “left turning circles” and had begun a third circle, he perceived that the airplane “just stalled.” An examination of the airframe and engine did not detect any preimpact anomalies that would have precluded normal operation. The airplane’s anti-ice and propeller anti-ice switches were found in the “off” position. A review of weather information revealed that the airplane was operating in an area with the potential for moderate icing and snow. Based on the GPS data and weather information, it is likely that the airframe collected ice during the descent and approach, which affected the airplane’s performance and led to an aerodynamic stall during the climb.

An editorial "what led to it / how to avoid it" analysis for this accident is generated separately and will appear here.

View the official NTSB docket →