Piper PA32 — Lake City, FL

What happened

A witness described that, when the pilot arrived at the airport several days before the accident, the airplane’s engine “cut out” while on final approach to the runway. After landing uneventfully, the pilot had a mechanic service the airplane, and the engine performed normally. On the day of the accident, as the airplane departed, the witness reported that he watched the airplane turn “hard left” after it cleared trees near the runway. He later heard a loud bang, then saw smoke. He drove over to the smoke and saw that the airplane was completely engulfed in flames. The airplane came to rest in the yard of a residence about 1,000 feet left of the runway’s midpoint.

Postaccident examination of the airplane was limited due to impact and postcrash fire damage; however, no defects consistent with a preimpact failure or malfunction of either the airframe or engine were observed. Additionally, a sound spectrum analysis of the audio from a video recording showed that the engine was likely running slightly below full throttle before the accident. Given this information, there was no evidence that a loss of engine power preceded the accident.

The witness’s description that the airplane was in a “hard left” turn, the location of the accident site relatively close to the runway, the lack of a discernable horizontal wreckage path, and little fragmentation of the wreckage to suggest a high-energy impact, were consistent with the airplane impacting the ground in a near-vertical descent at a relatively low speed. Thus, it is likely that the pilot exceeded the airplane’s critical angle of attack during the steep, low-altitude turn shortly after takeoff, which resulted in an aerodynamic stall and loss of airplane control at an altitude too low for recovery.

An editorial "what led to it / how to avoid it" analysis for this accident is generated separately and will appear here.